Interlux Micron 66 Antifouling Boat Bottom Paint
$410.00
AVAILABLE IN STOCK
Buy Interlux Micron 66 Antifouling Boat Bottom Paint For Sale Online.
Interlux Micron 66 Antifouling Boat Bottom Paint for sale.
The top-rated Interlux Micron 66 is formulated to provide a level of anti-fouling protection not previously available in any paint. Micron 66 provides the best anti-fouling performance in the harshest fouling conditions for 2 YEARS and beyond. Over time Micron 66 polishes and becomes smoother with usage, reducing your boat’s drag, and fuel consumption, and minimizing sanding time during reapplications. Micron 66 is designed for professional application and is ideal for use on all sizes of boats including super yachts.
Features:
- Best antifouling performance in the harshest fouling conditions for 2 years and beyond
- Outperforms old TBT antifouling paints
- Top-rated antifouling in independent tests for maximum protection and long life
- Formulated specifically for professional application
- Maximum protection even during stationary periods at the dock or mooring
- Perfect for Fiberglass, Wood, and properly primed underwater Metal
- Long lasting Self Polishing Copolymer with Biolux
- Micron 66 is not for freshwater use
- Sold in gallons only.
Associated Products:
Interlux Spray Thinner: For thinning and cleaning
Interlux Brush-Ease: For thinning and cleaning
Available in 4 colors: Black (ILX-YBA-473), Blue (ILX-YBA-470), Green (ILX-YBA-471), Red (ILX-YBA-472)
Why Micron technology?
Micron Technology is the basis of all Micron bottom paints and the formulations are second to none. Micron Technology was first introduced to the industry in the early 80’s and has evolved into the class leading antifouling paints.
- Longest lasting, multi-season ability to haul and re-launch without repainting
- Controlled polishing like a bar of soap reduces paint build up, eliminating the need for sanding
- Micron Technology polishes to a smoother surface than hard antifoulings – maximizing fuel savings
- Unlike old fashion high copper bottom paints, Micron uses less copper more efficiently for longest lasting antifouling protection
How To Apply Interlux Micron 66 Bottom Paint
Prior to application, shake and mix well. Stir Micron 66 continuously while using. Thin only when necessary with Interlux Brush Ease 433 or Special Thinner 216 (not to exceed 10% by volume). at least 2 coats should be applied. For ultimate performance, apply a total of 6 mils dry film thickness to avoid premature polish through. This may be achieved in 2 coats by spray and 3 coats by roller. Apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear, and any leading edges.
- Application Method: Airless Spray, Brush, Conventional Spray, Roller
- Number of Coats: 3
- Dry Film Thickness per Coat: 2 mils (5.2 wet mils)
- Coverage: 320 sq. ft/gal.
- Application Temp: 41° F. Min. / 95°F. Max.
- Thinner: Special Thinner 216 or Brush-Ease 433
| Temp | To Touch | To Recoat | To Launch |
| 95°F | 1/2 HR | 4 HR | 12 HR |
| 73°F | 1/2 HR | 6 HR | 12 HR |
| 59°F | 2 HR | 8 HR | 18 HR |
Surface Preparation
- Previously Painted Surfaces in Good Condition (TBT Copolymers)
- Wet sand antifouling paint with 80-grit sandpaper to a clean firmly attached surface.
- Clean with Special Thinner 216.
- Apply one coat of Primocon, TBT Sealer or Micron 55.
- Previously Painted Surfaces in Good Condition (Non-TBT Copolymers)
- Wet sand antifouling paint with 80-grit sandpaper to a clean firmly attached surface.
- Clean with Special Thinner 216.
- Apply one coat of Primocon YPA984.
- Previously Painted Surfaces in Poor Condition
- Use Interstrip to remove all traces of antifouling.
- Sand and wipe clean with Fiberglass Solvent Wash 202.
- Bare Fiberglass (Polyester or Vinylester)
- Clean and dewax bare fiberglass with Fiberglass Surface Prep YMA601 and Fiberglass Solvent Wash 202.
- Bare Wood
- Sand with 80-grit sandpaper. Remove sanding residue with Special Thinner 216.
- Repair surface defects with Watertite, then sand and wipe clean.
- Apply first coat of Micron 66 reduced 10% with Special Thinner 216 or Brush-Ease 433.
- Fill seams, if necessary, with Seam Compound Brown 30.
- Apply 2 additional coats of Micron 66.
Application Procedure
- Apply at least 2 full coats by brush or (solvent resistant) 3/8″ nap roller.
- If during application, brush pulls or roller drags, use Interlux Brush Ease 433 to improve handling.
- Apply an extra coat to high water areas such as waterline, bow, and keel areas.
- Use Special Thinner 216 or Brush-Ease 433 for equipment clean up.
Be the first to review “Interlux Micron 66 Antifouling Boat Bottom Paint”
Related products
Antifouling boat bottom paint
AVAILABLE IN STOCK Sold in Gallons
Antifouling boat bottom paint
AVAILABLE IN STOCK
Reviews
There are no reviews yet.